Table of Contents
Advertisement
F
C
EATURES AND
SELECTABLE DISPLAYS
There are six selectable top level displays in the driver information center:
• DISPLAY 1 - Engine FAULTS - Indicates trouble codes for the engine. For information and use, see Diagnostics on
page 71.
• DISPLAY 2 - EPAS FAULTS - Indicates trouble codes for the EPAS. For information and use, see Diagnostics on
page 71.
• DISPLAY 3 - MAINT - Indicates status of serviceable items and allows user to reset or clear the maintenance
reminder.
• DISPLAY 4 - SETUP - Allows the user to set up vehicle preferences.
• DISPLAY 5 - CLOCK - Allows the user to set up clock and time preferences.
• DISPLAY 6 - INFO - Provides vehicle information.
To enter the selectable displays:
1.
Make sure the key is in the OFF position.
2.
Press and hold the OK button on the display control pad while turning the ignition key to the
ON position. Turning the key past the ON position and starting the engine will exit the display.
3.
Release the OK button.
4.
Use UP and DOWN on the control pad to scroll through the top level displays.
Display 3 - MAINT
NOTICE: All options in this menu are editable.
1.
With MAINT displayed, press the RIGHT arrow to enter the mainte-
nance menu.
2.
The first display (A or B) indicates the status of oil mainte-
nance:
• Display A - OIL OK indicates no maintenance required.
• Display B - OIL REPL indicates that oil replacement is
required.
3.
Press DOWN to toggle to the second display (C or D) which
will be either:
• Display C - SPARK OK indicates no maintenance
required.
• Display D - SPARK REPL indicates that spark plug
replacement is required.
4.
In either of the OK displays (A or C) there are two options:
• Do nothing. No maintenance is required at this time.
• If the service is performed before the scheduled mainte-
nance reminder is indicated, the maintenance reminder
can be reset.
– In OIL OK or SPARK OK, press OK on the display con-
trol pad to enter edit mode (wrench displays).
– Use the LEFT and RIGHT arrows to toggle between OK
and COMP (for complete).
– Select the COMP option and press the OK button to
reset the maintenance reminder. If the OK option is
selected when the OK button is pressed, edit mode exits
without resetting the reminder.
22
ONTROLS
A
B
C
D
Hide quick links:
Advertisement
Table of Contents
