Pulse Speed Control Mode - BONMET SDL10A User Manual

4.5.4 Function
1. Acceleration / deceleration time setting（Related parameters: Pn-34，Pn-35）
⑴ In case of overloading, it is suggested to set the acceleration / deceleration time to avoid the impact of the
instantaneous large current to avoid error or failure.
⑵ Set the value of Pn-34 for acceleration time constant while Pn-35 for deceleration time constant, the unit is ms.
4.6

Pulse Speed Control Mode

●
Three type optional input pulse command(pulse/direction pulse, CCW/CW pulse, A phase/B phase pulse )
●
Two types of input signal
●
Optional electric gears
●
Speed limitation and torque limitation can be set
4.6.1 Terminal Diagram
optional（open collector signal、differential signal）
BONMET motion GmbH/www.bonmet.com/www.bonmet.de
29