Usim Apn Mode Vs. Manual Apn Mode - Hughes 9201 User Manual

USIM APN M . M
ODE VS
The ACA feature supports two different modes; USIM APN mode and Manual APN mode. These
two modes are supported across all IP Address Ranges for all QoS assignments.
USIM APN M (
ODE DEFAULT
USIM APN Mode is used if Automatic Context Activation is enabled and the user has not defined
a specific APN to be used. If no APN is defined, the UT will read the APN name directly from the
USIM when attempting to establish a PDP context.
M APN M
ANUAL ODE
Manual APN Mode is used if Automatic Context Activation is enabled and the user has defined
a specific APN to be used. If an APN is defined, the UT will use that APN when attempting to
establish a PDP context.
If the APN requires a username and password to successfully establish a PDP context, it must be
defined as well.
LaunchPad allows the user to define the APN, along with any required username and password
under BGAN Services. After the APN has been defined, it will be available when configuring the
UT Automatic Connection Mode.
90
APN M
ANUAL ODE
)
BGAN 9201 User Manual