(basic NAT). After a TE establishes a dedicated data connection, it no longer uses the shared
connection.
To establish a connection with the network, select one of the profiles from the APN Profile dropdown
menu and click the Connect button. Once connected, the global IP field will be populated, and the
Connect button will change to Disconnect.
3.3.2
AP N P rofiles
•
Profile Settings: This section allows the user to choose the default satellite APN profile by
selecting the APN profile from the dropdown menu and clicking the Apply Changes button. At
least one profile needs to be configured and selected as the default profile.
Defined APN Profiles: This section allows the user to configure up to five APN profiles for use
•
with satellite or cellular connections. Enter values for the following fields to define a new
APN profile:
–
Profile Label
–
Profile APN
–
APN Username
–
APN Password
Note: The APN Username and APN Password fields are mandatory.
After clicking Apply Changes, an APN profile will be created and will appear on the APN profile table.
The profile can be configured to prompt for a password when selected.
Figure 4: Connection page
Chapter 3 • Using the Web UI
H62751 Revision C
15