Aca - Hughes 9201 User Manual

ACA

This web page allows you to use Automatic Context Activation (ACA) in two different ways;
using static IP addresses in the TE device you can establish an automatic PDP context with any
QoS that is offered by the network (upper half of the web page), or, using DHCP from the UT, you
can establish an automatic background PDP context for any TE that connects to the UT (lower
part of the web page).
You can also chose whether the context should be activated as soon as the UT detects the
device, or if the context should only be activated when the TE attempts to send data to the
satellite link. For the "data activated" option, use the "DA" button rather than the On button.
With DA, if the context is ever deactivated, it will be reactivated when more data is sent.
The UT must be restarted before it will automatically activate contexts for newly configured ACA
entries.
If you change the SIM card you may need to reconfigure your ACA settings, e.g. if the APN or
username or password is different between the two SIM cards.
ACA settings for TEs with Static IP address:
You can setup your own range of static IP addresses for setting up an automatic PDP context
with any of the QoS‟s offered by the network.
To turn on a particular range of addresses, select the "On" radio button and choose a range of
addresses, low and high to use (e.g. 192.168.128.200 to 192.168.128.209) or leave the defaults. To
have the context only be activated when the TE sends data, select "DA".
Next select the desired QoS for that range of IP addresses (32K streaming). The APN listed is the
default APN read from the USIM card (bgan.inmarsat.com). If your USIM is provisioned for more
than one APN, then you can type a secondary APN in this field.
If your Service Provider requires a username and password, enter them in the next two fields.
44
BGAN 9201 User Manual