Wireless Connection Troubleshooting - Technicolor TG589vac Setup And User Manual

7.3 Wireless connection troubleshooting

Forgot your wireless key?
If you have changed the wireless settings manually and you don't remember your settings, try one of the following:
1 Use a computer that is already connected to your network.
If none of your computers is connected to the wireless network, connect one with an Ethernet cable. For more
information, see
2 Browse to the web interface.
For more information, see
3 Click Wireless. The Wireless page appears.
4 On the left menu, select the access point that you want to view.
5 Under Access Point, you can find the network name (SSID) and wireless key (password).
The TG589vac does not appear in your wireless client's access point list
Make sure that the TG589vac wireless interface is enabled.

a Browse to the
For more information, see
b In the Wireless card header, make sure that the switch is
If the signal is low or not available, try to reposition the TG589vac for optimal performance.

Change the wireless

The TG589vac access point no longer available
If you were able to connect in the past, but can't connect anymore:
Make sure that the wireless client adapter is enabled (message like "radio on").

Make sure that the wireless client is still using the correct wireless settings (network name (SSID), security settings).

DMS3-CTC-25-226 v1.0. Copyright © 2016 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
"2.3 Connecting your wired devices" on page
"4.1.1 Accessing the TG589vac web interface from your local network" on page
TG589vac web interface.
"4.1.1 Accessing the TG589vac web interface from your local network" on page
channel.
17.
.
7 Support
34.
34.
64