Set Up A Mobile Fallback Connection - Technicolor TG589vac Setup And User Manual

2.5 Set up a mobile fallback connection

Mobile fallback
Your TG589vac allows you to use a mobile Internet connection as fallback connection for your main Internet connection.
This means that your TG589vac will automatically switch to the mobile Internet connection when your main Internet
connection is down.
Downloading and uploading over the mobile Internet connection may results in additional charges.
Your TG589vac will automatically switch back to the main Internet connection as soon as it becomes available again.
What do I need?
To set up mobile fallback connection, you need:
A mobile Internet dongle

Only use the mobile Internet dongles provided by your service provider.
A registered Security Identity Module (SIM) card.

Connect your mobile Internet dongle to the TG589vac
Proceed as follows:
1 Make sure that the SIM card is correctly inserted in your mobile Internet dongle.
2 Plug the mobile Internet dongle into the USB port of your TG589vac.
3 Wait for two minutes to allow your TG589vac to detect the mobile Internet dongle.
Configure the mobile Internet connection
Proceed as follows:
1 Browse to the TG589vac GUI.
For more information, see
DMS3-CTC-25-226 v1.0. Copyright © 2016 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
"4.1.1 Accessing the TG589vac web interface from your local network" on page
2 Setting up your TG589vac
34.
20