Technicolor TG589vac Setup And User Manual page 14

Broadband LED (if you are using the DSL gateway scenario)
Colour
Green
Off
Broadband LED (if you are using the local router scenario)
Colour
Green
Off
Internet LED
Colour
Green
Red
Wireless LED
Colour
Green
Off
Both the 2.4 GHz and 5 GHz access point have a dedicated Wireless LED.
WPS LED
Colour
Green
Orange
Red
For more information about WPS, see
DMS3-CTC-25-226 v1.0. Copyright © 2016 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
State Description
Solid on DSL line synchronised.
Blinking Trying to detect carrier signal or pending DSL line synchronisation.
DSL line synchronised.
- or -
Your TG589vac powered off.
State Description
Solid on Connected to the WAN device.
Not connected to the WAN device.
State Description
Solid on Connected to the Internet, no activity.
Blinking Connected to the Internet, sending/receiving data.
Solid on No Internet connection.
State Description
Solid on The wireless interface is enabled, no wireless activity.
Blinking The wireless interface is enabled, wireless activity.
The wireless interface is disabled.
State Description
Solid On Client successfully registered via WPS.
Blinking WPS registration ongoing.
Blinking Error occurred.
"3.1 Connecting your wireless client via WPS" on page
1 Getting started
24.
10