Setting Up Your Tg589Vac - Technicolor TG589vac Setup And User Manual

2 Setting up your TG589vac

Setting up your main services
Proceed as follows:
1 Connect your TG589vac to your service provider's network.
For more information, see
2 Power on your TG589vac.
For more information, see
3 Connect your network devices. To do this using:
 A wireless connection, see
A wired connection, see

We recommended you to first connect one computer/tablet (if possible via a wired connection), then complete
the rest of the procedure and as a final step connect the other (wired and/or wireless) devices.
4 Configure your TG589vac using the built-in web interface.
For more information, see
Setting up additional services
When you subscribed you may have purchased additional services or items. For more information on how to:
Set up a mobile data fallback connection using a mobile Internet dongle, see

page 20 for more information.
DMS3-CTC-25-226 v1.0. Copyright © 2016 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
"2.1 Connecting your TG589vac to your service provider's network" on page
"2.2 Powering on your TG589vac" on page
"3 Wireless networking" on page
"2.3 Connecting your wired devices" on page
"2.4 Configure your TG589vac services" on page
2 Setting up your TG589vac
16.
23.
17.
19.
"2.5 Set up a mobile fallback connection" on
13.
12