Configuring Wpa(2)-Psk Encryption - Technicolor TG589vac Setup And User Manual

3.4.1 Configuring WPA(2)-PSK encryption

Procedure
Proceed as follows:
1 Browse to the TG589vac.
For more information, see
2 Click Wireless. The Wireless page appears.
3 On the left menu, select the access point that you want to configure.
4 In the Security Mode list under Access Point, select one of the following modes:
 WPA2-PSK
 WPA-PSK + WPA2-PSK
For more information, see
5 In the Wireless Password box, type a the key of your choice. The key must consist of 8 to 63 alphanumeric characters.
For example: MyKey123.
6 Click Save.
7 Reconnect your wireless client(s) to your TG589vac using the new security settings.
For more information, see
wireless client" on page
DMS3-CTC-25-226 v1.0. Copyright © 2016 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
"4.1.1 Accessing the TG589vac web interface from your local network" on page
"Encryption types" on page
"3.1 Connecting your wireless client via WPS" on page 24
27.
29.
or
3 Wireless networking
34.
"3.2 How to manually connect a
30