Accessing The Samba Server - Technicolor TG589vac Setup And User Manual

5.1 Accessing the Samba server

Introduction
The Samba server allows you to share the content on your USB storage device(s) with other devices that are connected to
your local network (mostly computers).
These devices have read and write access to the shared content.
Accessing the Samba server on Windows
Proceed as follows:
1 Open (File) Explorer and then click Network.
2 The Network window appears. Double-click OPENWRT.
You can also access the device by entering \\192.168.1.1 in the address bar.
3 The storage devices that are attached to your TG589vac are listed as folders.
4 If you plan to frequently use this folder, it might be useful to map this folder as a network drive. For more information, see
the help of your operating system.
Accessing the Samba server on Mac
Proceed as follows:
1 Open a Finder window. Under SHARED click openwrt and then click usbdisk.
2 The storage devices that are attached to your TG589vac are listed as folders.
DMS3-CTC-25-226 v1.0. Copyright © 2016 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
5 Sharing content
55