How To Manually Connect A Wireless Client - Technicolor TG589vac Setup And User Manual

3.2 How to manually connect a wireless client

Procedure
To connect a wireless client to the wireless network, configure that wireless client with the wireless settings (network name
and wireless key) of your access point.
If your TG589vac is still using the default wireless settings, use the network name (SSID) and wireless key that is printed on
the product label of your TG589vac (or product ID card if included).
You can always find back the current wireless settings via the TG589vac web interface. For more information, see
"Forgot your wireless key?" on page 64
DMS3-CTC-25-226 v1.0. Copyright © 2016 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
3 Wireless networking
27