Dsl Gateway Setup - Technicolor TG589vac Setup And User Manual

2.1.1 DSL gateway setup

Connecting the cables
Proceed as follows:
1 Take the DSL cable. This is the grey cable that is included in your package.
Only use the DSL cable provided in your package. Other DSL cables may not work with the DSL subscription
that you purchased.
2 Plug one end of the cable in the grey DSL port on the back of your TG589vac.
3 If your delivery:
 Does not include a DSL splitter, plug the other end of the DSL cable into your telephone wall socket.
Includes a DSL splitter, plug the other end of the DSL cable into the DSL/Modem port of the DSL splitter. Plug the

(LINE) cable of the DSL splitter into your telephone wall socket.
A splitter/filter is a box that typically has the following connectors:
A Line input

A Phone/PSTN output

A DSL/Modem output (optional)

DMS3-CTC-25-226 v1.0. Copyright © 2016 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
DSL
2 Setting up your TG589vac
14