To Remove Cover - Britax safe-n-sound maxi lite Instructions For Installation & Use

CARE & MAINTENANCE

TO REMOVE COVER:

A. Remove the restraint from vehicle.
B. Disengage the harness tongues from the harness buckle.
C. Remove any accessories, shoulder pads (if fitted).
See pages 66 to 67 to remove or replace any Accessories.
D. Remove headrest cover by unclipping the press studs on the
on the cover underneath the headrest wings. Lift elastic over
headrest wings while peeling away headrest cover.
62
Instructions for Installation & Use - Series No. 8100/A/2013
D
Pull to unclip press stud
D
Peel headrest cover over headrest wings
E. Unhook the elastic loops at the bottom of the restraint
located under the front of the restraint, and at the back of the
restraint at the top.
Unclip the press studs on the cover in the middle panel.
Unhook clip on both sides of the seat next to the forward
facing belt path slots.
F. Remove the cover while feeding through the crotch buckle,
harness straps through the slots in the cover.
Instructions for Installation & Use - Series No. 8100/A/2013
CARE & MAINTENANCE
Unhook the elastic loops at the
back of the restraint
Press
studs
Unhook the elastic loops at the
bottom of the restraint
Unhook clips both sides
63