Britax safe-n-sound maxi lite Instructions For Installation & Use page 17

Convertible booster seat
Table of Contents

Advertisement

SPECIAL FEATURES - CHILD USE
18
17
10
19
16
10. Top Tether Storage Pocket (attached to cover)
11. Instruction Book Storage Pocket
12. Booster Mode (Red) seatbelt path labels (both sides)
13. Forward Facing/ Toddler mode seatbelt path for the car's Lap-sash seatbelt or lap only seatbelt
14. Forward Facing/ Toddler mode (Yellow) seatbelt path labels (both side)
15. Recline Foot
16. Top Tether attachment clip and VERSATETHER™Catch
17. Car's Upper Anchorage fitting
18. Top Tether Strap Adjuster
19. Adjustable Top Tether Strap
NOTE: Not all features are supplied on some models. "If fitted" is used to indicate some of the features
that may not be on the seat supplied.
32
Instructions for Installation & Use - Series No. 8100/A/2013
10
11
12
13
16
14
15
This child restraint uses a top tether strap in a vehicle seating position with a child restraint upper anchor
fitting or anchorage point. If there is no anchor fitting see pages 68 to 71.
Do not use in the Booster Seat mode until the shoulders reach the middle shoulder height marker.
Continue to use this child restraint until child reaches the upper shoulder height marker. Children are safest
travelling in a Booster Seat until their shoulders reach the upper shoulder height marker of the Booster
Seat.
THIS RESTRAINT MUST BE USED IN CARS WITH FORWARD-FACING SEATS WITH A LAP-SASH
SEATBELT OR WITH A SEAT BELT AND CHILD HARNESS.
Suitable only for use with the following Child Harness: Safe-n-Sound Protecta PLUS™ child harness series
220/2010 and series 220/2013. This seat is not suitable for use with any other child safety harness.
Instructions for Installation & Use - Series No. 8100/A/2013
SUITABLE FOR USE
33

Advertisement

Table of Contents
loading

Table of Contents