Britax safe-n-sound maxi lite Instructions For Installation & Use page 25

CHILD HARNESS PREPARATION
C. Pull the left hand Harness Strap & Cross Strap back
through the opposite shoulder slot. Hook the Child
Harness Attachment Clip onto the VERSATETHER™
Catch and ensure that the straps are equal in length.
IMPORTANT:
Always adjust the height of the shoulder straps as
the child grows.
VERSATETHER™ is only intended for use in
attaching a child harness.
48
Instructions for Installation & Use - Series No. 8100/A/2013
Hook the Attachment Clip
onto VERSATETHER™
Catch.
Pull left hand harness strap
through the opposite slot until the
straps are of equal length.
CHILD HARNESS PREPARATION
HEADREST POSITION:
Before installation ensure that the headrest is set to the correct height for your child (refer to page 27).
Headrest should be just above the child's shoulders.
The Child Harness shoulder straps must be in the
slots which are nearest to the child's shoulders, but
not lower than the child's shoulders.
Instructions for Installation & Use - Series No. 8100/A/2013
Orange = Child Harness straps
through slot and under cross bar.
49