Britax safe-n-sound maxi lite Instructions For Installation & Use page 21

HOW TO USE
PLACING CHILD IN THE RESTRAINT USING LAP SASH SEAT BELT &
UPPER ANCHORAGE STRAP
A. Determine whether an upright or reclined installation is
preferred as shown right.
B. To move the recline foot from upright to reclined mode or
vice versa, pull the foot outwards to unlock it, then rotate the
foot. Push to lock in place. See 3 steps below.
C. Remove the SLIDEGUARD™ Clip from the seat storage
location and follow the adjustment instructions on
page 37 and 38.
D. Raise headrest/sash guide to allow the child to be
accommodated. Follow the adjustment instructions on
page 39.
Pull out 1
40
Instructions for Installation & Use - Series No. 8100/A/2013
Upright
Reclined
Rotate
Push in to lock
2 3
E. Attach the top tether strap to the car upper anchorage
fitting (as shown right) and remove all slack. Do not
overtighten causing the seat to lift.
F. To lengthen the Upper Anchorage Strap, fully press
Adjuster Button (A) while pulling Upper Anchorage
Strap (B) to slacken as shown right.
G. To tighten pull strap (C) but do not over tighten. Fold
up excess strap and store excess strap in the pocket
provided.
The restraint is now ready for use as a child booster.
H. Sit the child in the seat.
Always attach hook and remove slack.
Instructions for Installation & Use - Series No. 8100/A/2013
HOW TO USE
Attachment Clip
Car's Upper Anchorage fitting
Fully press Adjuster Button (A)
while pulling top tether strap (B)
to lengthen.
A
Pull Adjustment Strap to
remove slack
Red seat belt path
BOOSTER
labels
SEATBELT PATH
B
C
41