To Remove Child - Britax safe-n-sound maxi lite Instructions For Installation & Use

HOW TO USE
CHECKLIST - BOOSTER MODE SETUP
Centre of button on buckle, level with top of thighs.
Lap belt firmly on hips/thighs.
All slack removed from crotch strap when buckle is in the correct position.
Sash belt is fitted through sash guide
NOTE: Stop using this Booster Seat if the child's shoulders are above the Upper Shoulder Height
Marker.
IMPORTANT: ALWAYS USE THE SLIDEGUARD™ CLIP

TO REMOVE CHILD

Disengage seat belt tongue and buckle, remove the lap portion of seat belt from the SLIDEGUARD™ Clip
and remove belt from child.
When Booster is not being used, secure in position, by engaging seat belt over the booster seat.
44
Instructions for Installation & Use - Series No. 8100/A/2013
INSTALLING SAFE-N-SOUND PROTECTA PLUS™CHILD HARNESS
WITHOUT EXTENSION STRAP INTO VEHICLE
Hook the Child Harness attachment clip (1) onto booster seat VERSATETHER™Catch (2A). Then hook
booster seat attachment clip (2B) onto vehicle anchor fitting (3). Ensure that none of the straps are twisted
or passing over any sharp edges.
Red Sash Belt
Guide markers
Buckle fitted with
SLIDEGUARD™ Clip
(Always use this device).
Red Lap Belt
Guide markers
CHILD HARNESS PREPARATION
1
1. Attachment Clip from Child Harness.
2A. VERSATETHER™ Catch.
2B. Booster seat Attachment Clip.
3. Anchor Fitting in the car.
1
2A
Instructions for Installation & Use - Series No. 8100/A/2013
2B
3
Child Harness Attachment Clip attaches to
the VERSATETHER™
2B
2A
45