Remove Cover - Britax Safe-N-Sound Instruction Manual

CARE AND MAINTENANCE - REMOVE COVER
80
Instructions for Installation & Use
TO REMOVE COVER FOR WASH:
NOTE: There is no need to disconnect the
shoulder harness assembly straps from restraint.
Step 1. Remove the restraint from vehicle.
Step 2. Disengage the harness tongues from
Step 3. Remove any accessories, infant insert,
3
To remove headrest cover:
Step 1. Lift headrest to the highest position and
1
Step 2. Behind the headrest reveal the hidden
2
the harness buckle.
crotch pad and shoulder pads (if
supplied).
unclip press studs on both sides, then
unhook clips on both sides attached
under headrest wings.
elastic, lift out and remove elastic over
and away from headrest.
Peel headrest cover away.