8 ) Start Incubation - Rcom PRO 20 User Manual

1
Preparing for incubation start
Confirm
1
1
At first, confirm the incubator is connected with your computer normally. ( Computer icon on the screen
means successfully connected.)
(If the incubator is not successfully connected with the computer, you can not start incubation.)
2
Press "New" button.
3
Input incubation related data, such as project name, bird name, and species, etc.
Setting part will be indicated with blue bar which means setting available state.
4
Here, you can change each setting value.
21 21 21 21
8. Start Incubation
3
Click
2
Input
T I P!
When you input new project, press "New" button.
Then, blue bar, which makes modifying available,
will appear even you don't press "Setting".
4
modify