Rcom PRO 20 User Manual page 23

2
Incubation conditions set up on setting part
3
Click
4
6
5
Select the species of birds. If you select the species of birds, the bird's incubation data which is inputted on
1
"Logo" part will be set as setting value. (Temp. humidity, egg-turning angle& interval will be set automatically.)
2 Even if the setting value set up automatically, you can modify each setting value.
Here, you can modify the temperature, humidity, incubation period, and egg-turning angle& interval.
If you check RND, egg-turning angle & interval will get changed every time.
Temp. Mode Selecting:
3
Standard Mode – Progress incubation according to the set value (Temp. & humidity)
Special Mode – Temp. & humidity daily optional setting available, by using incubation graph.
4 Select egg size which you will progress incubation project. (Large, Standard, and Small sized egg)
You can not change the egg size onder incubation.
5
Working Mode Selecting :
Automatic mode – It is same with incubator automatic mode. But, it uses PC.
Manual mode – You can change each setting value free, D-Day will be counted up.
PC connecting mode – It is similar with manual mode. D-Day will be counted down.
(All three mode above will be made of DB, when you connect with PC.)
Input basic incubation data. After completing the setting, save it.
6
7
If you press this button, it starts incubation with melody within 2~10sec.
If you set the temperature and humidity with special mode, do not start incubation and refer to the next page.
1
Click 7
Select
Click
2 Adjustment
22 22 22 22