1 ) Installation Specifications And Cd File Contents - Rcom PRO 20 User Manual

1. Installation Specifications
Spec.
CPU
Memory
HDD Capacity
Graphic Card
Operating
System (OS)
Monitor
Resolution
USB
T I P!
This program performs initial incubation setting value continuously
even if you disconnect the incubator with PC after starting incubation.
And when you connect the incubator with PC again, all data will be
sent off to the PC.
In other words, you can connect the incubator and PC only when you
need to change setting or check temp. & humidity during disconnection.
If you started incubation from PC, you must also terminate
incubation by PC.
T I P!
Program termination is different from incubation termination.
Even if you terminate the program for other works
will progress continuously. Incubation termination means all
hatching is done, and you can execute only with
on your PC. .
T I P!
When you remove the USB cable from computer, be sure to terminate computer.
If not, error can be caused on the computer.
Min. Spec.
Pentium 2
(Over 500 MHz)
256 MByte
30 MByte
XGA
Windows XP
1024 x 768
1.0
Recommended Spec.
Pentium 3
(Over 1GHz )
512 MByte
100 MByte
SVGA
Windows XP
1024 x 768
2.0
, incubation
button
2 2 2 2