Incubation; Incubation Installation / Incubation Start 9 - Rcom REPTILE PRO 90 User Manual

North America Sales & Service www.RcomCo.com
Preparation for Incubation
Before inserting eggs, please start incubation after
checking if all functions work without any problem by
operating incubator sufficiently.
Environment condition of incubation room for installing reptile
incubator.
(temperature : 22~25℃ (71.6~77℉) / humidity : RH 30~50%)
▶ It is for making water supply be smooth when beginning
incubation, and fill water for humidification in the water
tank located on [Fig-1] ⓐ, ⓑ of downside main body.
▶ See [Fig-7] for ⓒ of [Fig.-1].
In case of moving with water filled, as it may cause a
breakdown, fill water after installing it at the place
where you want to incubate.
▶ Heater part for humidification in the upper side of main
body[Fig. 2] should be submerged in the water of the
inside of water tank in case of assembling with the lower
part of main body. Please be sure to check and close
sight glass and plug in to operate for about 30~40 minutes.
Please be careful not to give any heavy power or shock
on the heater part for humidification in the upper side
of main body as it may be a cause of breakdown.
Some foreign substance is created on the heater part
after use, however, there isn't any problem caused of it.
(See cleaning method)
▶ In case of using without inserting water, it is necessary to
turn off its humidifying function.
(See humidifying function OFF mehtod)
▶ Put 2 bags of reptile vermis and 1200cc of water into tray
and mix. [Fig-3]
It is possible to purchase a vermiculite for reptile
incubation separately.
▶ It has an automatic humidifying function, however, as the
inside humidity of incubator depends on the water quantity
mixed with reptile vermi, please be sure to check the
incubation environment of reptile.
In case that the reptile vermi was completed dried, it
may be in very dry state by absorbing the surrounding
humidity of incubator inside and egg. It is good to start
after understanding the required environment for each
reptile kind and making previous test if incubation
environment is proper to minimize incubation failure.
DIGITAL INCUBATOR
Rcom Reptile Incubator Pro 90 User Manual

3. Incubation

(1) Preparation for Incubation /
How to Start Incubation
[ 그림-2 ]
[Fig-1]
Heate
part for
humidification
[Fig-2]
1200cc
[Fig-3]
9