Rcom PRO 20 User Manual page 6

Connect the computer port and the incubator port.
1
(Be sure to the power code is connected with incubator.)
CAUTION
You would better to specify
one USB port for use.
Do not change USB port position.
If you connect USB,
2
"Found New Hardware" message will appear as above.
5 5 5 5
2. Driver Installing (Manual)
Click
1
Click 2
3
After a few seconds, the message will appear
1
as above. Then, check on
or specific Location [Advanced]".
Click "NEXT".
2
1
Click
4
Check "Include this location in the
1
Find out the folder which have drive,
2
and press "Browse" button.
"Install From a list
Click
2
search".