Fanvil i20S User Manual page 31

[键入文字]
Field Name
Advanced Settings
Switch Mode
Keypad Mode
Switch-On Duration
Talk Duration
Remote Password
Local password
Description
Enable Access Table
Hot Key Dial Mode
Select
Call Switched Time
Day Start Time
Day End Time
Address of Open Log
Server
Port of Open Log
Server
Explanation
Monostable: there is only one fixed action status for door unlocking.
Bistable: there are two actions and statuses, door unlocking and door locking.
Each action might be triggered and changed to the other status. After
changed, the status would be kept.
Initial Value is Monostable
Password+dialing: password input is default. Dialing mode is as below if you
want.
Only password: password input only, dialing would be forbidden.
Only dialing: dial input only, * Key to enter the dial, the # key to hang up.
Initial Value is Password and dialing.
Door unlocking time for Monostable mode only. If the time is up, the door
would be locked automatically. Initial Value is 5 seconds.
The call will be ended automatically when time up. Initial Value is 120 seconds
Remote door unlocking password. Initial Value is "*".
Local door unlocking password via keypad, the default password length is 4.
Initial Value is "6789".
Device description displayed on IP scanning tool software. Initial Value is "i20S
IP Door Phone".
Enable Access Table: enter <Access Code> for opening door during calls.
Disable Access Table: enter <Remote Password> for opening door during calls.
Default Enable.
<Primary /Secondary>mode allow system to call primary extension first, if
there were no answer, it would cancel the call and then call secondary
extension automatically.
<Day/Night>mode allow system to check the calling time is belong to Day or
Night time, and then decide to call the number 1 or number 2 automatically.
Users just press speed dial key once.
The period between hot key dialing to the first and second number. Initial
Value is 16 seconds.
The start time of the Day When you select<Day/Night>mode.
The end time of the day When you select <Day/Night>mode.
Log server address(IP or domain name)
Log server port (0-65535) , Initial Value is 514.
31
/ 50