Fanvil i20S User Manual page 20

[键入文字]
Note: In practice, VLANs are distinguished by the use of VLAN IDs.
Advanced
Field Name
Link Layer Discovery Protocol (LLDP) Settings
Enable LLDP
Enable Learning
Function
Packet Interval(1~3600)
VLAN Settings
Enable VLAN
VLAN ID
802.1p Signal Priority
802.1p Media Priority
Quality of Service (QoS) Settings
Enable DSCP QoS
Media QoS Priority
Signal QoS Priority
Explanation
Enable or Disable Link Layer Discovery Protocol (LLDP)
Enables the telephone to synchronize its VLAN data with the Network
Switch. The telephone will automatically synchronize DSCP, 802.1p, and
VLAN ID values even if these values differ from those provided by the LLDP
server.
The time interval for sending LLDP Packets
Enable or Disable WAN Port VLAN
Specify the value of the VLAN ID. Range is 0-4095
Specify the value of the signal 802.1p priority. Range is 0-7
Specify the value of the voice 802.1p priority. Range is 0-7
Enable or Disable Differentiated Services Code Point (DSCP)
Specify the value of the Media DSCP in decimal
Specify the value of the Signal DSCP in decimal
20
/ 50