Fanvil i20S User Manual page 27

[键入文字]
Caller ID Header
Enable Strict Proxy
Enable user=phone
Enable SCA
Enable BLF List
Enable DNS SRV
Keep Alive Type
Keep Alive Interval
Enable Session Timer
Session Timeout
Enable Rport
Enable PRACK
Keep Authentication
Auto TCP
Enable Feature Sync
Enable GRUU
BLF Server
BLF List Number
SIP Encryption
SIP Encryption Key
RTP Encryption
RTP Encryption Key
Set the Caller ID Header
Enables the use of strict routing. When the phone receives packets from the
server, it will use the source IP address, not the address in via field.
Sets user=phone in SIP messages.
Enable/Disable SCA (Shared Call Appearance )
Enable/Disable BLF List
Set the line to use DNS SRV which will resolve the FQDN in proxy server into a
service list
Set the line to use dummy UDP or SIP OPTION packet to keep NAT pinhole
opened
Set the keep alive packet transmitting interval
Set the line to enable call ending by session timer refreshment. The call session
will be ended if there is not new session timer event update received after the
timeout period
Set the session timer timeout period
Set the line to add rport in SIP headers
Set the line to support PRACK SIP message
Keep the authentication parameters from previous authentication
Using TCP protocol to guarantee usability of transport for SIP messages above
1500 bytes
Feature Sycn with server
Support Globally Routable User-Agent URI (GRUU)
The registered server will receive the subscription package from ordinary
application of BLF phone.
Please enter the BLF server, if the sever does not support subscription package,
the registered server and subscription server will be separated.
BLF List allows one BLF key to monitor the status of a group. Multiple BLF lists
are supported.
Enable SIP encryption such that SIP transmission will be encrypted
Set the pass phrase for SIP encryption
Enable RTP encryption such that RTP transmission will be encrypted
Set the pass phrase for RTP encryption
27
/ 50