Opening The Network Config Menu; Setting Up The Dynamic Host Configuration Protocol Client - Cisco 7920 User Manual
Wireless ip phone
Hide thumbs
Also See for 7920:
- Administration manual (238 pages) ,
- Phone manual (98 pages) ,
- Regulatory compliance and safety information manual (90 pages)
Table of Contents
Advertisement
Opening the Network Config Menu
1. In standby mode, press
2. Press
shown in Figure 7-2. Press
Network Config menu.
Figure 7-2 Network Config Menu
Setting Up the Dynamic Host
Configuration Protocol Client
The Dynamic Host Configuration Protocol (DHCP)
client provides a mechanism for allocating IP
addresses dynamically so that addresses can be reused
when hosts no longer need them. Figure 7-3 shows the
details for the Network Config>DHCP
Enable/Disable submenu.
68
until you see the Network Config menu
.
to open the
78-14564-01
Advertisement
Table of Contents
