Placing A Call On Hold; Resuming A Held Call; Parking A Call - Cisco 7920 User Manual

Figure 4-1 Switching Between Calls

Placing a Call on Hold

1. When the line is connected, press
you see the Hold tab.
2. Press

Resuming a Held Call

When a call is placed on hold, the Hold tab is replaced
by the Resume tab. Press

Parking a Call

1. During an active call, press
the Park tab.
2. Press
26
to place the call on hold.
to park a call.
or
to resume a held call.
or until you see
until
78-14564-01