Installing And Removing The Battery - Cisco 7920 User Manual

To obtain a replacement battery, contact
Caution
your local dealer. Use only the batteries
that have one of the following Cisco part
numbers: CP-BATT-7920-STD (standard
battery) or CP-BATT-7920-EXT
(extended use battery).
Use only the power supply that is provided
Caution
by Cisco. The Cisco part numbers are:
CP-PWR-7920-NA (for North America),
CP-PWR-7920-CE (for Central Europe),
CP-PWR-7920-UK (for United Kingdom),
CP-PWR-7920-AU (for Australia), and
CP-PWR-7920-JP (for Japan).
To see translations of the warnings that appear in this
publication, refer to the Regulatory Compliance and
Safety Information for the Cisco Wireless IP
Phone 7920 document that accompanied this
product.

Installing and Removing the Battery

1. To install the battery, insert the two catches of the
battery (as shown in Figure 2-1) in the
corresponding slots near the bottom of the
Cisco Wireless IP Phone 7920 User Guide
Getting Started
15