Setting Ip Address For The Primary Gateway - Cisco 7920 User Manual

5. Press
numeric keys to enter the IP address for the
Subnet Mask. Press
last entered when editing.
6. Press
editing the IP address for the Subnet Mask.
7. Press

Setting IP Address for the Primary Gateway

1. Follow Step 1 to Step 3 in the "Setting Up the
Dynamic Host Configuration Protocol Client"
section on page 68.
2. Scroll to Disable to disable the DHCP client.
3. Press
press
4. Press
press
5. Press
numeric keys to enter the IP address for the
Primary Gateway. Press
number last entered when editing.
6. Press
editing the IP address for the Primary Gateway.
7. Press
72
to enter the edit mode. Use the
when you have finished entering or
to return to the Static Settings menu.
or to scroll to Static Settings. Then
to enter the Static Settings menu.
or to scroll to Primary Gateway. Then
.
to enter the edit mode. Use the
when you have finished entering or
to return to the Static Settings menu.
to delete the number
to delete the
78-14564-01