Cisco 7920 User Manual page 112

4. Press
The Activate function is deactivated during
Note
an active phone call. A "Function inactive
during call" warning message appears if you
try to activate the WEP key settings during
an active phone call.
5. Press
A check mark appears next to the activated WEP
key.
Configuring a WEP Key
1. Open the Encryption menu.
2. Press
wish to configure.
3. Press
4. Press
5. Press
as shown in Figure 7-7.
Figure 7-7 WEP Key Settings Menu
84
or to scroll to Activate.
to activate the selected WEP key.
or to scroll to the WEP key that you
.
or to scroll to WEP Key Settings.
to open the WEP Key Settings menu,
78-14564-01