6102 Micro-Bath User's Guide
Calibration Parameters
9.12.4
9.12.5
44
info@Fluke-Direct.com
C0 and CG
These parameters calibrate the accuracy of the bath set-point. These are programmed
at the factory when the bath is calibrated. DO NOT alter the value of these parameters.
If the user desires to calibrate the bath for improved accuracy then calibrate R0,
ALPHA, and DELTA according to the procedure in Section 12.
rCAL
DO NOT adjust this parameter. It is for factory use only.
Fluke-Direct
.com
1.888.475.5235