Introduction - Fluke 6102 User Manual

2
info@Fluke-Direct.com

Introduction

The Hart Scientific 6102 Micro-Bath may be used as a portable instrument or bench
top temperature calibrator for calibrating thermocouple and RTD temper ature probes.
The 6102 is small enough to use in the field, and accurate enough to use in the lab.
Calibrations may be done over a range of 35°C to 200°C (95°F to 392°F). The
resolution of the 6102 temperature display is 0.01 degrees.
The Micro-Bath calibrator features:
Convenient handle
RS-232 interface
Switchable AC Input (115 VAC or 230 VAC)
Built in programmable features include:
Temperature scan rate control
Temperature switch hold
Eight Set-point memory
Adjustable readout in °C or °F
The temperature is accurately controlled by Hart's digital con troller. The controller
uses a precision platinum RTD as a sensor and controls the well temperature with a
solid state relay (triac) driven heater.
The LED front panel continuously shows the current well temperature. The
temperature may be easily set with the control buttons to any desired tempera ture
within the specified range. The calibrator's multiple fault protection de vices insure
user and instrument safety and protection.
The 6102 Micro-Bath was designed for portability, low cost, and ease of opera tion.
Through proper use, the instrument will continuously provide accurate calibration
of temperature sensors and devices. The user should be familiar with the safety
guidelines and operating procedures of the calibrator as de scribed in the instruction
manual.
Fluke-Direct
Introduction
.com
1.888.475.5235
7