Configuration Procedure - HP 830 Series Configuration Manual

Figure 40 Network diagram

Configuration procedure

Before performing the following configuration, make sure the device and the host are accessible to each
other through available routes, and the IPv6 addresses of the interfaces are configured as shown
40.
This configuration may vary with DNS servers. The following configuration is performed on a PC running
Windows Server 2003. Make sure the DNS server supports the IPv6 DNS function so that the server can
process IPv6 DNS packets, and the interfaces of the DNS server can forward IPv6 packets.
1. Configure the DNS server:
a. Select Start > Programs > Administrative Tools > DNS.
The DNS server configuration page appears, as shown in
b. Right-click Forward Lookup Zones, select New Zone, and then follow the wizard to create a
new zone named com.
Figure 41 Creating a zone
c. On the DNS configuration page, right-click zone com, and select Other New Records.
79
Figure 41.
Figure