Protocols And Standards; Ipv6 Basics Configuration Task List - HP 830 Series Configuration Manual

The switching engine on the HP 830 Series PoE+ Unified Wired-WLAN switch does not support tunneling
and NAT-PT.

Protocols and standards

Protocols and standards related to IPv6 include:
RFC 1881, IPv6 Address Allocation Management
•
• RFC 1887, An Architecture for IPv6 Unicast Address Allocation
RFC 1981, Path MTU Discovery for IP version 6
•
RFC 2375, IPv6 Multicast Address Assignments
•
RFC 2460, Internet Protocol, Version 6 (IPv6) Specification
•
RFC 2464, Transmission of IPv6 Packets over Ethernet Networks
•
• RFC 2526, Reserved IPv6 Subnet Anycast Addresses
RFC 2894, Router Renumbering for IPv6
•
RFC 3307, Allocation Guidelines for IPv6 Multicast Addresses
•
• RFC 3513, Internet Protocol Version 6 (IPv6) Addressing Architecture
RFC 4191, Default Router Preferences and More-Specific Routes
•
• RFC 4443, Internet Control Message Protocol (ICMPv6) for the Internet Protocol Version 6 (IPv6)
Specification
RFC 4861, Neighbor Discovery for IP Version 6 (IPv6)
•
RFC 4862, IPv6 Stateless Address Autoconfiguration
•

IPv6 basics configuration task list

Task
Configuring basic IPv6
functions
Configuring IPv6 ND
Configuring path MTU
discovery
Configuring IPv6 TCP properties
Configuring IPv6 FIB forwarding
Enabling IPv6
Configuring an IPv6 global unicast address
Configuring an IPv6 link-local address
Configure an IPv6 anycast address
Configuring a static neighbor entry
Setting the maximum number of dynamic neighbor
entries
Configuring parameters related to RA messages
Configuring the maximum number of attempts to
send an NS message for DAD
Configuring ND snooping
Configuring a static path MTU for a specific IPv6
address
Configuring the aging time for dynamic path MTUs
101
Remarks
Required.
Required to
configure one.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.