Configuring An Address Pool On The Dhcp Server; Configuration Task List; Creating A Dhcp Address Pool - HP 830 Series Configuration Manual

Task
Configuring the DHCP server security functions
Enabling handling of Option 82
Specifying the threshold for sending trap messages

Configuring an address pool on the DHCP server

Configuration task list

Task

Creating a DHCP address pool

Configuring address
allocation mode for a
common address pool
Configuring dynamic address allocation for an extended address pool
Configuring a domain name suffix for the client
Configuring DNS servers for the client
Configuring WINS servers and NetBIOS node type for the client
Configuring BIMS server information for the client
Configuring gateways for the client
Configuring Option 184 parameters for the client with voice service
Configuring the TFTP server and bootfile name for the client
Configuring self-defined DHCP options
Creating a DHCP address pool
When you create a DHCP address pool, specify it as a common address pool or an extended address
pool.
To create a DHCP address pool:
Step
1. Enter system view.
2. Create a DHCP address pool
and enter its view.
A common address pool and an extended address pool are different in address allocation mode
configuration. Configurations of other parameters (such as the domain name suffix and DNS server
address) for them are the same.
Configuring static address allocation
Configuring dynamic address allocation
Command
system-view
dhcp server ip-pool pool-name
[ extended ]
22
Remarks
Optional.
Optional.
Optional.
Remarks
Required.
Required to configure either
of the two for the common
address pool configuration.
Required for the extended
address pool configuration.
Optional.
Remarks
N/A
No DHCP address pool is created by
default.