Displaying And Maintaining The Dhcp Relay Agent; Dhcp Relay Agent Configuration Examples); Dhcp Relay Agent Configuration Example - HP 830 Series Configuration Manual

Poe+ unified wired-wlan switch switching engine
Hide thumbs Also See for 830 Series:
Table of Contents

Advertisement

Displaying and maintaining the DHCP relay agent

Task
Display information about DHCP server
groups correlated to a specific or all
interfaces.
Display Option 82 configuration
information on the DHCP relay agent.
Display information about bindings of
DHCP relay agents.
Display statistics information about
bindings of DHCP relay agents.
Display information about the
refreshing interval for entries of
dynamic IP-to-MAC bindings.
Display information about the
configuration of a specific or all DHCP
server groups.
Display packet statistics on the DHCP
relay agent.
Clear packet statistics on the DHCP
relay agent.

DHCP relay agent configuration examples)

DHCP relay agent configuration example

Network requirements
As shown in
server.
Because the DHCP relay agent and server are on different subnets, you need to configure a static route
or a dynamic routing protocol to make them reachable to each other.
You need to perform the configuration on the DHCP server to guarantee the client-server communication.
For more information about DHCP server configuration, see
Figure
25, the DHCP relay agent forwards messages between DHCP clients and the DHCP
Command
display dhcp relay { all | interface
interface-type interface-number } [ | { begin
| exclude | include } regular-expression ]
display dhcp relay information { all |
interface interface-type interface-number }
[ | { begin | exclude | include }
regular-expression ]
display dhcp relay security [ ip-address |
dynamic | static ] [ | { begin | exclude |
include } regular-expression ]
display dhcp relay security statistics [ |
{ begin | exclude | include }
regular-expression ]
display dhcp relay security tracker [ |
{ begin | exclude | include }
regular-expression ]
display dhcp relay server-group { group-id
| all } [ | { begin | exclude | include }
regular-expression ]
display dhcp relay statistics [ server-group
{ group-id | all } ] [ | { begin | exclude |
include } regular-expression ]
reset dhcp relay statistics [ server-group
group-id ]
"Configuring the DHCP
47
Remarks
Available in any
view.
Available in any
view.
Available in any
view.
Available in any
view.
Available in any
view.
Available in any
view.
Available in any
view.
Available in user
view.
server."

Advertisement

Table of Contents
loading

Table of Contents