Dhcp Server Configuration Examples; Static Ip Address Assignment Configuration Example - HP 830 Series Configuration Manual

Task
Clear information about IP address
conflicts.
Clear information about dynamic
bindings.
Clear information about DHCP server
statistics.

DHCP server configuration examples

DHCP networking involves the following types:
The DHCP server and client are on the same subnet and exchange messages directly.
•
The DHCP server and client are not on the same subnet and they communicate with each other via
•
a DHCP relay agent.
The DHCP server configuration for the two types is the same.

Static IP address assignment configuration example

Network requirements
As shown in
DNS server address, and gateway address from Switch A (DHCP server).
The client ID of VLAN-interface 2 on Switch B is:
3030-3066-2e65-3234-392e-3830-3530-2d56-6c61-6e2d-696e-7465-7266-6163-6532.
The MAC address of VLAN-interface 2 on Switch C is 000f-e249-8050.
Figure 20 Network diagram
Vlan-int2
10.1.1.1/25
Switch A
DHCP server
Configuration procedure
1. Configure the IP address of VLAN-interface 2 on Switch A:
<SwitchA> system-view
[SwitchA] interface vlan-interface 2
[SwitchA-Vlan-interface2] ip address 10.1.1.1 25
[SwitchA-Vlan-interface2] quit
Figure 20, Switch B (DHCP client) and Switch C (BOOTP client) obtain the static IP address,
Gateway
10.1.1.126/25
10.1.1.2/25
DNS server
Command
reset dhcp server conflict { all | ip ip-address }
reset dhcp server ip-in-use { all | ip
ip-address | pool [ pool-name ] }
reset dhcp server statistics
Vlan-int2 Vlan-int2
Switch B Switch C
DHCP Client BOOTP Client
34
Remarks
Available in user
view.
Available in user
view.
Available in user
view.