Configuring Gateways For The Client - HP 5920 Series Configuration Manual

The IP address of a static binding cannot be the address of the DHCP server interface. Otherwise,
•
an IP address conflict occurs and the bound client cannot obtain an IP address correctly.
To configure a static binding for a DHCP client whose interfaces use the same MAC address, you
•
must specify the client ID, rather than the MAC address to identify a requesting interface. Otherwise,
the client might fail to obtain an IP address.
To configure a static binding:
Step
Enter system view.
1.
2. Enter address pool view.
3. Configure a static binding.
4. (Optional.) Specify the lease
duration for the IP address.

Configuring gateways for the client

DHCP clients send packets destined for other networks to a gateway. The DHCP server can assign the
gateway address to the DHCP clients.
You can specify gateway addresses in each address pool on the DHCP server. A maximum of eight
gateways can be specified in DHCP address pool view or secondary subnet view.
The gateway-list command issued in DHCP address pool view specifies gateway addresses for all DHCP
clients that obtain IP addresses from this address pool. To specify gateways for clients that obtain IP
addresses from a secondary subnet, use the gateway-list command in secondary subnet view. If you
specify gateways in both address pool view and secondary subnet view, DHCP preferentially assign the
gateway addresses specified in the secondary subnet view to the clients on the secondary subnet.
To configure gateways in the DHCP address pool:
Step
1. Enter system view.
2. Enter DHCP address pool
view.
3. Specify gateways.
4. (Optional.) Enter secondary
subnet view
5. (Optional.) Specify gateways.
Command
system-view
dhcp server ip-pool pool-name
static-bind ip-address ip-address
[ mask-length | mask mask ]
{ client-identifier client-identifier |
hardware-address
hardware-address [ ethernet |
token-ring ] }
expired { day day [ hour hour
[ minute minute [ second second ] ] ]
| unlimited }
Command
system-view
dhcp server ip-pool pool-name
gateway-list ip-address&<1-8>
network network-address [ mask-length |
mask mask ] secondary
gateway-list ip-address&<1-8>
33
Remarks
N/A
N/A
By default, no static binding is
configured.
To add more static bindings,
repeat this step.
The default setting is one day.
Remarks
N/A
N/A
By default, no gateway is
specified.
N/A
By default, no gateway is
specified.