Setting The Alarms - Ambient Weather WS-12 User Manual

Press the ALARM key to view the LOW alarms along with the alarm clock time. Press the SET
key to view rainfall (1h and 24h) high alarm and pressure (ABS and REL) high/low alarm.
Press the SNOOZE/LIGHT key at any time to return to the normal mode

8.3 Setting the Alarms

Press and hold the ALARM key for three seconds to enter the alarm mode.
Next, press and hold the SET key for three seconds. The first alarm parameter will begin flashing
(alarm hour).
To save the alarm setting and proceed to the next alarm parameter, press (do not hold) the SET
key.
To adjust the alarm parameter, press the [+] or [-] key to increase or decrease the alarm settings, or
press and hold the [+] or [-] key for three seconds to increase or decrease the alarm settings
rapidly.
Press the ALARM key to turn on (the alarm icon will appear
Press the SNOOZE/LIGHT key twice at any time to return to the normal mode. After 30 seconds
of inactivity, the alarm mode will time out and return to normal mode.
The following is a list of the individual alarm parameters that are set (in order):
1. Alarm hour
2. Alarm minute
3. Rainfall (1h) high alarm
4. Rainfall (24h) high alarm
5. Wind Gust high alarm
6. Wind speed high alarm
7. Outdoor (channel 1) temperature high alarm
8. Outdoor (channel 1) temperature low alarm
9. Outdoor(channel 1) humidity high alarm
10. Outdoor(channel 1) humidity low alarm
11. Outdoor (channel 1) feels like high alarm
12. Outdoor (channel 1) feels like low alarm
13. Outdoor (channel 1) dew point high alarm
14. Outdoor (channel 1) dew point low alarm
15. Absolute pressure high alarm
16. Absolute pressure low alarm
17. Relative pressure high alarm
Version 1.1 ©Copyright 2016, Ambient LLC. All Rights Reserved.
) and off the alarm.
Page
30