Ambient Weather WS-12 User Manual page 22

12. Barometric Pressure Display Units (default: inHg). Press the SET key again to change the
pressure units of measure. Press the [+] key or [-] key to toggle the pressure units between
mmhg, inHg or hPa.
13. Backlight Color Setting (default: Outdoors). Press the SET key again to set the backlight
color defined parameter (the LED icon will be displayed). Press [+] key or [-] key to toggle
between IN (uses the indoor temperature to automatically display backlight color), OUT (uses
the channel 1 temperature to automatically display backlight color) or USE (manually set
your own backlight color to one of 11 choices).
The following section is based on the OUT, IN or USE setting selected.
13.1 OUT Backlight Color Setting (reference Figure 20).
13.2 Outdoor Backlight Color Low (OUT default: 10): Press the SET key again to
change the lower range of the color changing backlight spectrum (the LOWER icon will
be displayed). Press the [CH/+] key or [MINMAX/+] key to adjust the low temperature
limit.
13.3 Indoor Backlight Color High (default: 100): Press the SET key again to change
the upper range of the color changing backlight spectrum (the UPPER icon will be
displayed).
13.4 IN Backlight Color Setting (reference Figure 20).
13.5 Indoor Backlight Color Low (IN default: 58): Press the SET key again to change
the lower range of the color changing backlight spectrum (the LOWER icon will be
displayed). Press the [CH/+] key or [MINMAX/+] key to adjust the low temperature
limit.
13.6 Indoor Backlight Color High (default: 85): Press the SET key again to change the
upper range of the color changing backlight spectrum (the UPPER icon will be
displayed).
13.7 USE Backlight Color Setting (reference Figure 20).
13.8 Backlight Color (USE): Press the SET key again to manually select the backlight
color (the COLOR icon will be displayed). Press [CH/+] key or [MINMAX/+] key to
choose among 11 different colors.
Version 1.1 ©Copyright 2016, Ambient LLC. All Rights Reserved.
22
Page