Set (Program) Mode - Ambient Weather WS-12 User Manual

Note: The graph displays hours on the horizontal or x-axis (the most recent data to the right of
the graph). For example, 0h is the current data and -12 is 12 hours ago. The vertical axis or y-axis
auto-scales, displays the deviation from the current value (the most recent data will always display
0). For example, when temperature is displayed, if the bar displays 0.4, this represents 0.4 degrees
higher than the current value.

7.2 Set (Program) Mode

While in Normal Mode, press and hold the SET key for at least three seconds to enter the Set
Mode. The first setting will begin flashing. You can press the SET key again to skip any step, as
defined below.
Note: In the Set mode, press the [+] key or [-] key to change or scroll the value. Hold the [+]
key or [-] key for three seconds to increase/decrease rapidly.
Note: To exit the Set mode at any time, press the SNOOZE/LIGHT button on the top of the
display console.
1. 12/24 Hour Format (default: 12h):. Press the SET key again to adjust the 12/24 hour format
setting (FMT). Press the [+] key or [-] key to change between 12 hour and 24 hour format.
2. Change Hour. Press the SET key again to set the hour. Press the [+] key or [-] key to adjust
the hour up or down. Note the PM icon is present during afternoon hours.
3. Change Minute. Press the SET key again to set the minute. Press the [+] key or [-] key to
adjust the minute up or down.
4. Date Format (default: MM-DD): Press the SET key again to enter the day/month format
mode. Press the [+] key to switch between MM-DD-YY, DD-MM-YY.
5. Change Month. Press the SET key again to set the calendar month. Press the [+] key or [-]
key to adjust the calendar month.
6. Change Day. Press the SET key again to set the calendar day. Press the [+] key or [-] key to
adjust the calendar day.
7. Change Year. Press the SET key again to set the calendar year. Press the [+] key or [-] key to
adjust the calendar year.
8. Max/Min Clearing (default: ON). Press the SET key again to set the max/min clearing
mode (CLR). The Max/Min can be programmed to clear daily (at midnight) or manually.
Press the [+] key or [-] key to switch between "Clears 24h" and Clears Manually.
9. Temperature Units of Measure (default: °F):. Press the SET key again to change the
temperature units of measure (the UNITSET icon will be displayed). Press the [+] key or [-]
key to switch between °F and °C units of measure.
10. Wind Speed Units of Measure (default: mph). Press the SET key again to change the wind
speed units of measure . Press the [+] key or [-] key to toggle the wind speed units between
m/s, km/h, mph, knots or bft.
11. Rainfall Units of Measure (default: inch). Press the SET key again to change the Rainfall
units of measure. Press [+] key or [-] key to toggle the rainfall units between mm and inch.
Version 1.1 ©Copyright 2016, Ambient LLC. All Rights Reserved.
21
Page