Table of Contents
Advertisement
Figure 9. Reload System
8. When the unit restarts, the connection to the workstation is lost. Use your
browser to reconnect to the unit and then log on again to verify the software
upgrade.
Verifying software upgrade
1. Log in to the BSGX4e again. See
32).
2. On the right side of the window under the heading System, a line labeled
Application
Figure 10. Application Software Version
3. If the version that is listed is the desired upgrade, the software upgrade is
successful.
Changing the default application image
1. From the navigation list on the left pane of the System Screen, select
(See
2. Under
default by selecting the appropriate button under Default. (See
3. Select Apply.
4. Ensure that the desired image is now highlighted under Default.
37
NN47928-303
lists the software version that is currently running:
Figure
7)
Application image to boot
Logging on to the Web user interface (page
from, select the image that is to be the
BSGX4e Business Gateway Installation Guide
Upgrade.
Figure
8)
Release 01.01
Advertisement
Table of Contents
