Table of Contents
Advertisement
3. Inspect the BSGX4e and the shipping carton for any potential damage that
occurred during shipping.
If you discover that items are missing or damaged, consult your customer support
(see
Preparing for Physical Installation
To prepare for the physical installation of the unit, you need to:
1. Prepare the unit location.
2. Determine where the unit is to be connected.
3. Locate the cables and terminal to perform the installation.
Location Requirements
Ensure that the planned location meets the following requirements:
A stable, flat surface to support the unit. The size and weight of the unit are:
.
Note: Do not place the unit on top of other equipment or place other
A clean, dry environment with adequate air circulation. The operating
temperature and humidity requirements are:
Electrical power: 110 Volts of Alternating Current (VAC) 60 Hertz (Hz) for the
AC adapter. The BSGX4e device operates on 12 Volts of Direct Current (VDC),
which is supplied through the AC adapter provided with the unit.
Console and Cables Required
To log on and initialize the unit, connect a console to the CONSOLE port. The
console can be any PC that can run a terminal emulator (such as Tera Term Pro).
BSGX4e Business Gateway Installation Guide
Release 01.01
"How to get help" on page
Height
1.25" (318 millimeter)
Width
9.6" (243.8 mm)
Depth
7.54" (194.5 mm)
Weight
2.3 lb. (1.05 kilogram)
equipment on top of the unit.
Operating
32 to 104
Temperature
Relative
5% to 95% (non condensing)
Humidity
11).
o
F (0 to 40
o
C)
16
NN47928-303
Advertisement
Table of Contents
