Display - Adam Equipment pgw series User Manual

Before you start weighing, you have to wait for the balance to achieve a
stable internal temperature. Typical initial warm-up time suggested for a
balance already at room temperature is about 1 hour.

6.0 DISPLAY

The LCD has several areas-
- A large 7 digit area to display the weight with symbols for
common weighing units on its right and symbols for zero, tare
(Net) and stability on the left.
- A 10 digit area which allows a large amount of flexibility for
displaying text messages concerning menus, operation and
errors, for example to display the current weighing mode or to
guide the user through processes such as density
determination
- A percentage indicator known as capacity tracker which is a
0-100% bar graph consisting 10 large segments for indicating
the percentage of the total balance capacity used and arrows
for check weighing.
© Adam Equipment Company 2007
followed by a symbol indicating the balance is in
busy mode. If the balance serial number is not
set the display will show dashes. The display
will show zeroes accompanied by the
symbol. If the balance is not used for a long
time, it will go back to the auto-calibration mode.
A stable sign ~ is shown when the balance is in
stable condition. It will turn off if the balance is
not stable.
Exact zero is shown when the "
on to the left of the display area.
Page 9 of 48
0
" symbol is
0