Specifications - Adam Equipment pgw series User Manual

Page 6 of 48

2.0 SPECIFICATIONS

Model* PGW
153e
Maximum 150g
capacity
Readability
Tare range
Repeatability
(S.D.)
Linearity (±)
Units of grams, milligrams (for 0.001g units only), kilograms, carats, pennyweights,
measure
Interface
Operating
temperature
Power supply
Calibration
External 100 g
calibration
mass
Display
Draught shield
Housing
Pan size
Overall
dimensions
(w x d x h)
Net weight
Applications
*
The same models are available with motorised internal calibration as series denoted with 'i'
© Adam Equipment Company 2007
PGW PGW
253e
250g
0.001g
0.001g
0.002g
grains, troy ounce, ounces, pounds, drams, taels (Hong Kong, Taiwan
and Singapore), mommes, tolas, ticals, Newtons and Custom
Output voltage 15 VDC, 800 mA through
External Power Supply Module- supplied as standard
(Input Voltage 100–240 V, 50/60 Hz)
Selectable Automatic Calibration due to change in time or temperature
200 g
Backlit LCD with dual digits (24 mm high) and capacity tracker
Supplied as standard
(glass weighing chamber for models with 1mg readability)
140×140mm
Weighing, Check weighing, Percentage weighing, Parts counting,
Animal / dynamic weighing, Net / total and Density determination
PGW
453e 753e 1502e
450g 750g 1500g
Full
RS-232 bi-directional
10°C - 40°C
Internal or External,
500 g 1000 g
Die cast aluminium housing
251 × 358 × 104 mm
5.5 kg
PGW PGW
2502e
2500g
0.01g
0.01g
0.02g
2000 g
Not applicable
192×192mm
PGW PGW
3502e 4502e
3500g 4500g