Keypad; Numeric Entry Method - Adam Equipment pgw series User Manual

7.0 KEYPAD

The keypad has the following keys to operate the balance.
Keys
[ 0/T ] or
[Esc]
[Unit] / or
[Down]
[Mode] / or
[Advance]
[Print] / or
[Back]
[Cal] / or
[Up]
[Setup]/
or [Enter]
7.1

NUMERIC ENTRY METHOD

To set a value when required, use the keys as given below-
- [Up] and [Down] keys to increase or decrease the flashing digit,
- [Advance] and [Back] keys to advance or move back the digit and
- [Enter] key to accept the value
© Adam Equipment Company 2007
Primary function
To turn the balance to ON or
Standby
A combined zero and tare
function
Selects weighing units by
cycling through a set of
enabled units
Enters the Mode Selection
Menu
Instructs the balance to print
data
Starts the calibration function
Enters the Setup parameters
(Supervisor Menus)
Page 11 of 48
Secondary function
-
To escape from setup
functions and modes
To decrement or change a
displayed value or scroll
through options backwards
To advance a flashing digit
by one position to the right.
To go back by one step
during setup functions
To advance a flashing digit
by one position to the left
To increase or change a
displayed value or scroll
through options forward
Enters a function or saves
a value while manually
manually entering unit
weight or check weighing
limits