Adam Equipment pgw series User Manual page 20

Page 20 of 48
MANUAL MODE
When the balance is in the MANUAL mode –
If [Enter] is pressed when "rUN" is selected, balance will display "START ?"
Place the item on the pan and press [Enter] again
After the configured Delay and test time are computed by the balance, the
result will be displayed by showing "FINISHED xx.xx x" after a pre-set time
Delay and Sampling period (see the section 9.4.4.1 Animal Weighing Setup
Parameters)
AUTO MODE
When the balance is in the AUTO mode –
If [Enter] is pressed when "rUN" is selected, balance will display "LOAD PAN"
Place the item on the pan. The animal weighing test will begin automatically
After the configured Delay and test time are computed by the balance, the
result will be shown displaying "FINISHED xx.xx x" (see the section 9.4.4.1 on
Animal Weighing Set-Up Parameters)
• During animal weighing if the [Print] key is pressed, the balance will
display "PAUSED" and show the current average weight
• To resume, press [Print] again or
• Pressing [Mode] will display "STOPPED" and terminate the weighing
• Remove the item from the pan
• Press [Mode] to go back to "ANIMAL
[Esc] to return to normal weighing
9.4.4.1 Animal Weighing Setup Parameters
• Press [Mode] and then [Up] or [Down] to select Animal Weighing.
When "ANIMAL" is displayed press [Enter] to enter the function
© Adam Equipment Company 2007
rUN" to weigh another item or