Adam Equipment pgw series User Manual page 34

Page 34 of 48
LANGUAGE
TIME
DATE DATE FORM
EUROPE (dd/mm/yy)
USA (mm/dd/yy)
INST ID
BUZZER
BACKLIGHT
POWER DOWN
FILTER
STABILITY
AUTO ZERO
The sub-menu is entered by pressing [Enter] –
• Use the [Up] and [Down] keys to increase or decrease the value for
setting. Press [Enter] to accept the setting and advance to the next
item in the menu
• Press [Mode] to advance to setting of the next parameter or [Esc] to
return to normal weighing
© Adam Equipment Company 2007
English
French
German
Spanish
Set Time using the numeric entry method
(see section 7.1)
Set Date using the numeric entry method
(see section 7.1)
Enter a user number to identify this balance
On= Enable
OFF= Disable
On
OFF
AUTO (default)
Set the time after which the unit will go into
Stand-by power
OFF=Disable, If set to On-
the options are 1 to 9 minutes
Set a value for the amount of filtering to be
done ranging from 1 to 10. A larger number
means more
response.
Set a value to be used to determine
balance stability, set
10d. A larger number corresponds to a
larger stable zone. Default is 5
Can be set to On or OFF to enable the
auto-zero function. If set to On- select from
1, 2 or 5d
settings, On=Enable,
filtering and
a value of 1, 2, 5 or
a slower